Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
10.1. Description of a design
10.2. Adjustment of the drive of switching off of coupling
10.3. Pumping of a hydraulic actuator of coupling
10.4. Removal of the main cylinder of a hydraulic actuator of coupling
10.5. Removal of a flexible hose of a hydraulic actuator of coupling
10.6. Removal of the working cylinder of a hydraulic actuator of coupling on the car with the engine UEPA-331
10.7. Removal of the working cylinder of a hydraulic actuator of coupling on the car with the VAZ-2106 engine
10.8. Replacement of a casing and the conducted clutch plate on the car with the engine UEPA-331
10.9. Replacement of a casing and the conducted clutch plate on the car with the VAZ-2106 engine
10:10. Removal of the mechanism of the drive of switching off of coupling on the car with the engine UEPA-331
10:11. Removal of the mechanism of the drive of switching off of coupling on the car with the VAZ-2106 engine
10:12. Councils of skilled
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










10-4-snyatie-glavnogo-cilindra-gidroprivoda-scepleniya.html

10.4. Removal of the main cylinder of a hydraulic actuator of coupling

The main cylinder of coupling on cars with engines UEPA-331 and VAZ-2106 is identical.

The syringe or rubber pear we select liquid from a coupling hydraulic actuator tank.

Special key "on 10", covering five sides, we unscrew the union of a steel tube of a hydraulic actuator of coupling from the main cylinder...

... also we take away a tube.

From salon of a passatizhama rasshplintovyvay a finger of fastening of a pedal of coupling to a pusher...

... also we take out a finger.

By head "on 13" with the extender it is turned off two nuts of hairpins of fastening of the main cylinder of a hydraulic actuator of coupling (these nuts serve also for fastening of an arm of pedal knot)...

... also we remove the main cylinder, bringing hairpins of its fastening out of openings in a motor board.

We install the main cylinder in the return sequence and we pump over a hydraulic actuator (see. "Pumping of a hydraulic actuator of coupling").


"previous page
10.3. Pumping of a hydraulic actuator of coupling
following page"
10.5. Removal of a flexible hose of a hydraulic actuator of coupling