Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
10.1. Description of a design
10.2. Adjustment of the drive of switching off of coupling
10.3. Pumping of a hydraulic actuator of coupling
10.4. Removal of the main cylinder of a hydraulic actuator of coupling
10.5. Removal of a flexible hose of a hydraulic actuator of coupling
10.6. Removal of the working cylinder of a hydraulic actuator of coupling on the car with the engine UEPA-331
10.7. Removal of the working cylinder of a hydraulic actuator of coupling on the car with the VAZ-2106 engine
10.8. Replacement of a casing and the conducted clutch plate on the car with the engine UEPA-331
10.9. Replacement of a casing and the conducted clutch plate on the car with the VAZ-2106 engine
10:10. Removal of the mechanism of the drive of switching off of coupling on the car with the engine UEPA-331
10:11. Removal of the mechanism of the drive of switching off of coupling on the car with the VAZ-2106 engine
10:12. Councils of skilled
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










10-5-snyatie-gibkogo-shlanga-gidroprivoda-scepleniya.html

10.5. Removal of a flexible hose of a hydraulic actuator of coupling

The flexible hose of a hydraulic actuator of coupling on cars with engines UEPA-331 and VAZ-2106 is identical. Operations on removal of a hose are shown on the car with the engine UEPA-331.

We perform work on a viewing ditch or the elevator.

Holding the top tip of a hose a key "on 17", we unscrew the tube union a special key "on 10", covering five sides...

... also we take away a tube from a hose.

That liquid did not follow, it is possible to put on the end of a tube a cap from the flowing union.

Head (or Rozhkov a key) "on 24" we turn off a lock nut of a hose, holding the top tip of a hose with Rozhkov a key "on 17"...

... also we bring a tip out of an arm opening.

Key "on 17" we turn off the lower tip of a hose, holding a key of the same dimension an adapter of the working cylinder (connection is condensed with a copper ring — see. "Removal of the working cylinder of a hydraulic actuator of coupling on the car with the engine UEPA-331", a photo 7).

We remove a flexible hose.

We establish a flexible hose in the return sequence. We pump over a hydraulic actuator (see. "Pumping of a hydraulic actuator of coupling").


"previous page
10.4. Removal of the main cylinder of a hydraulic actuator of coupling
following page"
10.6. Removal of the working cylinder of a hydraulic actuator of coupling on the car with the engine UEPA-331