Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
11.1. Description of a design
11.2. Oil replacement
11.3. Replacement of an epiploon of a secondary shaft
11.4. Removal of the drive of a speedometer
11.5. Removal and installation of the transmission on the car with the engine UEPA-331
11.6. Removal and installation of the transmission on the car with the VAZ-2106 engine
11.7. Replacement of an epiploon of a main shaft of the transmission on the car with the engine UEPA-331
11.8. Replacement of an epiploon of a main shaft of the transmission on the car with the VAZ-2106 engine
11.9. Replacement of the forward bearing of a main shaft of the transmission
11:10. Dismantling and assembly of the transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










11-4-snyatie-privoda-spidometra.html

11.4. Removal of the drive of a speedometer

We perform work on a viewing ditch or the elevator.

We disconnect a flexible shaft from the speedometer drive (see. "Removal of a flexible shaft of the drive of a speedometer").

Key "on 10" we turn off a bolt of fastening of the drive of a speedometer to the transmission...

... also we take out the drive.

For replacement of a rubber sealing ring...

... we hook it the screw-driver.

... also we remove.

We oil a new rubber sealing ring gearbox. We install the drive in the return sequence.


"previous page
11.3. Replacement of an epiploon of a secondary shaft
following page"
11.5. Removal and installation of the transmission on the car with the engine UEPA-331