Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
12.1. Description of a design
12.2. Oil replacement
12.3. Replacement of an epiploon of a main shaft
12.4. Replacement of an epiploon of a secondary shaft
12.5. Removal of the drive of a speedometer
12.6. Removal of the transmission
12.7. Removal of the forward bearing of a main shaft of the transmission
12.8. Dismantling and assembly of the transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










12-2-zamena-masla.html

12.2. Oil replacement

We carry out work by news agency a viewing ditch or the elevator. Before replacement of oil it is necessary to warm up it, having passed not less than 10 km on the car.

Six-sided key "on 12" we turn off a stopper of a drain opening...

... also we merge oil in the substituted capacity.

We clear a magnet of a stopper and we roll it.

Key "on 17" we turn off a stopper of a jellied opening.

With the syringe it is filled in new oil to the level of the lower edge of a jellied opening.

We roll a stopper.


"previous page
12.1. Description of a design
following page"
12.3. Replacement of an epiploon of a main shaft