Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
12.1. Description of a design
12.2. Oil replacement
12.3. Replacement of an epiploon of a main shaft
12.4. Replacement of an epiploon of a secondary shaft
12.5. Removal of the drive of a speedometer
12.6. Removal of the transmission
12.7. Removal of the forward bearing of a main shaft of the transmission
12.8. Dismantling and assembly of the transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










12-4-zamena-salnika-vtorichnogo-vala.html

12.4. Replacement of an epiploon of a secondary shaft

Work is carried out on a viewing ditch or the elevator. We remove the driveshaft (see. "Removal of cardan transfer").

We remove the rubber aligning ring.

We stop a flange from a provorachivaniye, having inserted a bolt of fastening of the elastic coupling into its opening.

Head "on 30" we turn off a nut of fastening of a flange...

... also we remove it (the nut is established on carving sealant).

We remove a washer (it is established by the convex party to a nut).

We remove a flange a three-gripping stripper (for descriptive reasons the photo is made on the dismantled box).

The flange can also be brought down by means of a long drift from soft metal.

We remove a flange.

Having hooked the screw-driver an epiploon of a secondary shaft...

... we remove it.

Having greased a working surface of an epiploon with a thin layer of Litol-24 lubricant, we press its suitable piece pipes. We establish the removed details and knots in the return sequence.


"previous page
12.3. Replacement of an epiploon of a main shaft
following page"
12.5. Removal of the drive of a speedometer