Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
13.1. Description of a design
13.2. Lubricant of shlitsevy connection of the driveshaft
13.3. Removal of cardan transfer
13.4. Replacement of an epiploon of shlitsevy connection of a flange of the elastic coupling and shaft of the forward driveshaft
13.5. Removal of the elastic coupling
13.6. Dismantling of the cardan hinge
13.7. Replacement of an intermediate support
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










13-4-zamena-salnika-shlicevogo-soedineniya-flanca-ehlastichnojj-mufty-i.html

13.4. Replacement of an epiploon of shlitsevy connection of a flange of the elastic coupling and shaft of the forward driveshaft

We remove cardan transfer (see. "Removal of cardan transfer").

With paint it is marked a relative positioning of the forward driveshaft and a flange of the elastic coupling.

The screw-driver we unbend epiploon holder petals.

We remove a flange assembled with the elastic coupling from a shlitsevy shaft of a shaft.

We remove an epiploon from a shaft shaft.

We collect knot in the return sequence. We put on a new epiploon (big outer diameter to a flange) on shlitsevy a shaft shaft. We grease shaft vents with Fiol-2U's lubricant. At connection of a shaft and flange we combine tags (see a photo 1). We press an epiploon a holder against the stop in a flange end face...

... also we turn in holder petals in a flange pro-point.


"previous page
13.3. Removal of cardan transfer
following page"
13.5. Removal of the elastic coupling