Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
14.1. Description of a design
14.2. Replacement of oil in the back bridge
14.3. Removal of a half shaft and replacement of an epiploon
14.4. Replacement of an epiploon of the leading gear wheel of the main transfer
14.5. Removal of a beam of the back bridge
14.6. Dismantling and assembly of a reducer of the back bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










14-2-zamena-masla-v-zadnem-mostu.html

14.2. Replacement of oil in the back bridge

We perform work on a viewing ditch or the elevator. Before replacement of oil it is necessary to warm up it, having passed not less than 10 km on the car.

Cap key "on 19" we turn off a stopper of a drain opening...

... also we merge oil in the substituted capacity.

We clear a magnet of a stopper of a drain opening...

... also we wrap it.

Cap key "on 19" we turn off a stopper of a jellied opening.

We fill in with the syringe oil to the level of the lower edge of a jellied opening.

We wrap a stopper.

Rotating and shaking a cap, we clean сапун ventilation of a case of the back bridge, located on the left casing of a beam.

In need of more careful clearing or replacement of a sapun...

... a key "on 11" we turn off сапун...

... also we remove it.

We clean сапун and we establish it into place.


"previous page
14.1. Description of a design
following page"
14.3. Removal of a half shaft and replacement of an epiploon