Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
15.1. Description of a design
15.2. Angles of installation of forward wheels
15.3. Removal of a spherical support
15.4. Removal of the lever
15.5. Removal of the stabilizer of cross stability
15.6. Removal of the directing spring rack
15.7. Replacement of the hug bearing
15.8. Removal of a stretcher
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










15-3-snyatie-sharovojj-opory.html

15.3. Removal of a spherical support

We carry out operation when replacing a spherical support or its boot.

We install the car on the elevator or a viewing ditch, we hang out a forward part of the car and we remove a wheel.

Cap key "on 19" we turn off a nut of fastening of a spherical support to the lever.

Stripper we press off a finger of a spherical support from the lever.

In the absence of a stripper we turn off a nut of a finger not completely.

We implant an assembly shovel between the lever and a clamping plate of a boot of a spherical support. Wringing out the lever, we strike with the hammer blows to an eye of the lever and we press off a finger.

Head "on 14" we turn off two bolts of fastening of a spherical support to a rotary fist.

Delaying the lever for a stabilizer bar down, we remove a spherical support.

If necessary we remove a clamping plate and we change a boot of a spherical support.

Before installation of a new boot we put in it ShRB-4 lubricant. We collect and establish a spherical support in the return sequence.


"previous page
15.2. Angles of installation of forward wheels
following page"
15.4. Removal of the lever