Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
16.1. Description of a design
16.2. Removal of the shock-absorber
16.3. Removal of a spring
16.4. Removal of the top bar
16.5. Removal of the lower bar
16.6. Removal of a cross bar
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










16-6-snyatie-poperechnojj-shtangi.html

16.6. Removal of a cross bar

We perform work on a viewing ditch or the elevator.

Cap key "on 19" we turn off a nut of a bolt of fastening of a bar to a body arm, holding a bolt from a provorachivaniye a key "on 17".

Through a drift from soft metal we beat out a bolt...

... also we take out it.

We bring a tip of a cross bar out of a body arm.

Cap key "on 19" we turn off a nut of a bolt of fastening of a bar to an arm of a beam of the back bridge, holding a bolt from a provorachivaniye a key of the same dimension.

We take out a bolt and we remove a cross bar.

If the bolt is not taken out, we push out it an assembly shovel, implanting it between an end face of a bolt and a beam of the back bridge.

We establish a bar in the return sequence. Nuts of bolts of fastening of a bar are finally tightened in situation "the car on wheels".


"previous page
16.5. Removal of the lower bar
following page"
17. Steering