Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
18.1. Description of a design
18.2. Pumping of brakes
18.3. Replacement of front brake shoes
18.4. Replacement of back brake shoes
18.5. Removal of the main brake cylinder
18.6. Removal of the vacuum amplifier of brakes and adjustment of a free wheeling of a pedal of a brake
18.7. Removal of pedal knot
18.8. Removal of the signaling device
18.9. Removal of a forward brake hose
18:10. Dismantling of the forward brake mechanism
18:11. Replacement of the back wheel cylinder
18:12. Removal of a back brake hose
18:13. Check of working capacity and adjustment of the drive of the regulator of pressure of back brakes
18:14. Removal of the regulator of pressure of back brakes and its drive
18:15. Adjustment and removal of knots of the parking brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










18-14-snyatie-regulyatora-davleniya-zadnikh-tormozov-i-ego-privoda.html

18:14. Removal of the regulator of pressure of back brakes and its drive

We perform work on a viewing ditch or the elevator.

Key "on 13" we turn off a nut of fastening of an axis of a rack of the regulator, holding an axis with a key "on 10".

We bring a rack axis out of an opening in an arm of a beam of the back bridge.

We remove a rack from a load spring.

Special key "on 10", covering five sides we unscrew unions of four tubes...

... also we take away them from pressure regulator.

Head "on 13" we turn off two nuts of back fastening of an arm of the regulator of pressure to a body...

... and Rozhkov a key "on 13" we weaken a nut of forward fastening of an arm.

We remove pressure regulator with an arm and a load spring.

We establish details of the drive of the regulator of pressure of back brakes in the return sequence. We pump over the brake system (see. "Pumping of brakes") we also adjust the drive (see. "Check of working capacity and adjustment of the drive of the regulator of pressure of back brakes").


"previous page
18:13. Check of working capacity and adjustment of the drive of the regulator of pressure of back brakes
following page"
18:15. Adjustment and removal of knots of the parking brake system