Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
18.1. Description of a design
18.2. Pumping of brakes
18.3. Replacement of front brake shoes
18.4. Replacement of back brake shoes
18.5. Removal of the main brake cylinder
18.6. Removal of the vacuum amplifier of brakes and adjustment of a free wheeling of a pedal of a brake
18.7. Removal of pedal knot
18.8. Removal of the signaling device
18.9. Removal of a forward brake hose
18:10. Dismantling of the forward brake mechanism
18:11. Replacement of the back wheel cylinder
18:12. Removal of a back brake hose
18:13. Check of working capacity and adjustment of the drive of the regulator of pressure of back brakes
18:14. Removal of the regulator of pressure of back brakes and its drive
18:15. Adjustment and removal of knots of the parking brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










18-5-snyatie-glavnogo-tormoznogo-cilindra.html

18.5. Removal of the main brake cylinder

We uncover with a tank of the main thing brake the cylinder...

... the laying reflector located under it...

... and with the syringe or a rubber pear it is deleted brake fluid from a tank.

Special key "on 10", covering five sides, we unscrew three unions of brake tubes.

Having shifted unions on tubes, we bring tubes out of openings in the cylinder and it is careful not to damage, we take them aside.

Cap or Rozhkov a key "on 17" we turn off two nuts of fastening of the main brake cylinder to the case of the vacuum amplifier...

... also we remove it together with a tank.

We install the main brake cylinder in the return sequence and we pump over the brake system (see. "Pumping of brakes").


"previous page
18.4. Replacement of back brake shoes
following page"
18.6. Removal of the vacuum amplifier of brakes and adjustment of a free wheeling of a pedal of a brake