Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
19.1. General information
19.2. Replacement of safety locks and relay
19.3. Removal of the assembly block
19.4. Zazhikaniye switch
19.5. Removal of the switch of ignition
19.6. Rechargeable battery
19.7. Cooling system fan electric motor
19.8. Generator
19.9. Starter
19:10. Headlights
19:11. Understeering switch
19:12. Sound signal
19:13. Cleaner and washer of a windshield
19:14. Back door glass heating system
19:15. Control devices
19:16. Control system of the economizer of compulsory idling (ECI)
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










19-12-zvukovojj-signal.html

19:12. Sound signal

The sound signal of type 20.3721 is established on the top panel of a frame of a radiator behind bars of a radiator. Joins the central button of a steering wheel. The contact ring of the button is fixed on a steering wheel, and the sprung contact Ч on a connector of the half-steering switch. If the sound of a signal became weak and hoarse, it can be adjusted, rotating the screw located from a reverse side of the case of a signal in this or that party.

Scheme of inclusion of a sound signal: 1 - sound signal; 2 - assembly block; 3 - to turnip of a sound signal; 4 - switch of a sound signal.

For removal of a sound signal we disconnect a wire of "weight" from the rechargeable battery. We remove a front grille (see. "Removal of a front grille"). We disconnect wires from a signal.

Cap key "on 10" we turn off a bolt of fastening of a signal.

We remove a signal.

We establish a signal in the return sequence.

For replacement of a contact ring of the button of a sound signal we remove a steering wheel (see. "Removal of a steering wheel"). We unscrew three screws of fastening of a contact plate to a nave of a steering wheel.

We remove a contact plate...

... also we disconnect from it a food wire.

We establish a contact plate and the removed details in the return sequence.


"previous page
19:11. Understeering switch
following page"
19:13. Cleaner and washer of a windshield