Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
19.1. General information
19.2. Replacement of safety locks and relay
19.3. Removal of the assembly block
19.4. Zazhikaniye switch
19.5. Removal of the switch of ignition
19.6. Rechargeable battery
19.7. Cooling system fan electric motor
19.8. Generator
19.9. Starter
19:10. Headlights
19:11. Understeering switch
19:12. Sound signal
19:13. Cleaner and washer of a windshield
19:14. Back door glass heating system
19:15. Control devices
19:16. Control system of the economizer of compulsory idling (ECI)
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










19-2-zamena-predokhranitelejj-i-rele.html

19.2. Replacement of safety locks and relay

The assembly block of the relay and safety locks is installed in a motor compartment on the left side near a motor board.

On the car blocks both old, and new (with nozhevidny safety locks) a sample can be installed. Blocks of different designs are not interchanged.

Electrically the chains protected by fuses (the assembly block of an old sample)

safety lock No. (current, And)

The electric chains protected by fuses

1(8)

Reserve

2(8)

Reserve

3(8)

Reserve

4(16)

Radiator fan relay winding. Electrochain switches and electric motor of an otolitel

5(3)

The switch of the alarm system (in the mode of indexes of turns), the breaker of indexes of turns, the switch of indexes of turns the Alarm lamp of indexes of turns, control lamps of indexes of the turns Backing Light Switch, backing lamps the Tachometer the Voltmeter the Index of level of fuel, the fuel level sensor, a control lamp of level of fuel the Index температурь! cooling liquid Sensor of temperature of Kontroln" lamp and sensor of emergency pressure of oil Lamp of critical condition of the brake system Switch of a hydraulic actuator of brakes Switch of the parking brake

6(8)

Switch and lamps of a stoplight Plafond of illumination of salon

7(8)

Lamps of a lamp of illumination of registration plate Control Pampas inclusions of dimensional illumination of the Lamp of illumination of levers отопитепя both lighter Plafond of illumination of a ware box Switch and lighting lamps of a combination of devices

8(16)

Sound signal, switch of a sound signal radiator fan Electric motor

9(8)

Lamp of dimensional light of a left headlight Lamp of dimensional light of the left back lamp

10(8)

Lamp of dimensional light of a right headlight Lamp of dimensional light of the right back lamp Switch of a lamp of fog lamps Control lamp of fog lamps

11 (8)

The switch, the breaker of indexes of turns and a lamp of indexes of turns, control Pampas in the mode of the alarm system

12(16)

The lighter, the socket for a portable lamp

13 (8)

Driving beam of a right headlight

14 (8)

Driving beam of a left headlight, control lamp of driving beam

15(8)

Passing beam of a right headlight

16(8)

Passing beam of a left headlight

The electric chains protected by fuses (the assembly block of a new sample)

safety lock No. (vulture of current. A)

The electric chains protected by fuses

F1(10 A)

Reserve

F2(10A)

Indexes of turns and the relay breaker of the alarm system (in the mode of the alarm system) the Control lamp of the alarm system

F3(10А)

Back lamps (stoplight lamp) Plafond of illumination of salon

F4(20А)

Element of heating back Rale (contacts) of inclusion of heating of back glass the Lighter, the socket for a portable lamp flew down

F5(20А)

Sound signal, switch of a sound signal

F6(30А)

Reserve

F7(30А)

The fan electric motor from пи those l I am the Electric motor of a washer of a windshield of the Relay (winding) of inclusion of an elektroventilntor of a radiator of the Relay (winding) of inclusion of heating of back glass the Control lamp of inclusion of heating of back glass the Plafond illumination of a ware box

F8(7,5 A)

Reserve

F9(7,5 A)

Reserve

F10(7,5 A)

Left headlight (dimensional light)

F11(7,5 A)

Right headlight (dimensional light)

F12(7.5 A)

Right headlight (passing beam)

F13(7.5 A)

Left headlight (passing beam)

F14(7,5 A)

Left headlight (driving beam) Control lamp of inclusion of driving beam of headlights

F15(7,5 A)

Right headlight (driving beam)

F16(15 A)

Indexes of turns and the relay breaker of the alarm system (in the mode of the indication of turns)
Control lamp of indexes of turns
Back lamps (backing light lamp)
Motor-reducer and relay of inclusion of screenwash
Control lamp of pressure of oil
Control lamp of the parking brake
Index of temperature of cooling liquid
The index of level of fuel with a control lamp of a reserve
Voltmeter

On the block of an old sample...

... we release two latches

... also we uncover the assembly block.

From the inside of a cover the symbols showing an arrangement of the relay and safety locks in the block are put.

Shaking, we take out the faulty relay from its nest.

We replace the relay only similar on marking and, respectively, an arrangement of contacts.

We take out a safety lock.

Before replacement of a safety lock establish the reason of its burn-out. Do not replace a safety lock with other face value (safety locks with a wide path — on 16 A, with narrow — on 8 A). Do not use instead of safety locks "bugs" from a wire at all.

On the assembly block of a new sample...

... latches of a cover are located sideways, from a car wing.

We uncover (on it the scheme of an arrangement of the relay and safety locks is also put).

Shaking, we take out the relay.

It is convenient to take out a safety lock the special tweezers located in the assembly block.

Safety locks of different face value have various color, but when replacing it is necessary to pay attention and to the face value figures put on a safety lock.

We install the relay and safety locks in the return sequence.


"previous page
19.1. General information
following page"
19.3. Removal of the assembly block