Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
20.1. Description of a design
20.2. Removal of a front grille
20.3. Removal of the lock of a cowl
20.4. Removal of a cowl
20.5. Removal of a mudguard of the engine
20.6. Removal of a front bumper
20.7. Removal of a forward wing
20.8. Replacement of a windshield
20.9. Removal of an external rear-view mirror
20:10. Replacement of an external part of the lock of a door
20:11. Removal of an upholstery of a door
20:12. Removal of the lock and handles of a door
20:13. Door glass removal
20:14. Removal of the mechanism of a window regulator
20:15. Removal of a door and adjustment of provision of a door in an aperture
20:16. Removal of a rear bumper
20:17. Removal of a gas-filled emphasis of a door of a back
20:18. Removal of the lock of a door of a back
20:19. Removal of a door of a back
20:20. Removal of the back panel of an upholstery of a luggage carrier
20:21. Removal of a casing of a floor
20:22. Removal of the dashboard
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










20-10-zamena-naruzhnojj-chasti-zamka-dveri.html

20:10. Replacement of an external part of the lock of a door

Work can be performed, without removing a door upholstery. Adjustment of the lock after its replacement will not be required.

By the crosswise screw-driver it is turned off two lower screws of fastening of an external part of the lock of a door.

We roll a hairpin of M6 50-70 mm long in the lower opening.

Having turned out the top screw of fastening...

... we remove an external part of the lock.

The hairpin at the same time holds an internal part of the lock, without allowing it to fall.

We put a new external part of the lock in the return sequence and we check ease of opening and closing of a door.


"previous page
20.9. Removal of an external rear-view mirror
following page"
20:11. Removal of an upholstery of a door