Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
20.1. Description of a design
20.2. Removal of a front grille
20.3. Removal of the lock of a cowl
20.4. Removal of a cowl
20.5. Removal of a mudguard of the engine
20.6. Removal of a front bumper
20.7. Removal of a forward wing
20.8. Replacement of a windshield
20.9. Removal of an external rear-view mirror
20:10. Replacement of an external part of the lock of a door
20:11. Removal of an upholstery of a door
20:12. Removal of the lock and handles of a door
20:13. Door glass removal
20:14. Removal of the mechanism of a window regulator
20:15. Removal of a door and adjustment of provision of a door in an aperture
20:16. Removal of a rear bumper
20:17. Removal of a gas-filled emphasis of a door of a back
20:18. Removal of the lock of a door of a back
20:19. Removal of a door of a back
20:20. Removal of the back panel of an upholstery of a luggage carrier
20:21. Removal of a casing of a floor
20:22. Removal of the dashboard
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










20-11-snyatie-obivki-dveri.html

20:11. Removal of an upholstery of a door

We remove the top and lower parts of an upholstery of a door for receiving access to the lock of a door and to the mechanism of a window regulator.

By the Shlitsevy screw-driver it is turned off two self-tapping screws of fastening of the internal handle of a door.

We remove the door handle.

By the thin shlitsevy screw-driver it is hooked and we remove an overlay of the handle of a window regulator.

We shift a lock washer...

... also we remove a washer and the handle of a window regulator.

We remove a podrozetnik.

By the Shlitsevy screw-driver it is turned off two self-tapping screws in the lower part of a pocket of a door.

We hook the screw-driver one percussion cap in a back bottom corner of an upholstery.

We remove the lower part of an upholstery of a door.

The crosswise screw-driver we unscrew the screw of fastening of facing of the handle.

We remove facing of the handle.

By the crosswise screw-driver it is turned off two self-tapping screws of fastening of the top part of an upholstery in a back part of a door...

.и one in a forward part of a door.

We shift up and we remove the top part of an upholstery of a door.

We remove a moisture protective film.

We establish both parts of an upholstery of a door in the return sequence.


"previous page
20:10. Replacement of an external part of the lock of a door
following page"
20:12. Removal of the lock and handles of a door