Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
20.1. Description of a design
20.2. Removal of a front grille
20.3. Removal of the lock of a cowl
20.4. Removal of a cowl
20.5. Removal of a mudguard of the engine
20.6. Removal of a front bumper
20.7. Removal of a forward wing
20.8. Replacement of a windshield
20.9. Removal of an external rear-view mirror
20:10. Replacement of an external part of the lock of a door
20:11. Removal of an upholstery of a door
20:12. Removal of the lock and handles of a door
20:13. Door glass removal
20:14. Removal of the mechanism of a window regulator
20:15. Removal of a door and adjustment of provision of a door in an aperture
20:16. Removal of a rear bumper
20:17. Removal of a gas-filled emphasis of a door of a back
20:18. Removal of the lock of a door of a back
20:19. Removal of a door of a back
20:20. Removal of the back panel of an upholstery of a luggage carrier
20:21. Removal of a casing of a floor
20:22. Removal of the dashboard
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










20-15-snyatie-dveri-i-regulirovka-polozheniya-dveri-v-proeme.html

20:15. Removal of a door and adjustment of provision of a door in an aperture

We perform work with the assistant.

Drift with a diameter of 4-5 mm we beat out an axis of the limiter of opening of a door.

We take out an axis.

The assistant holds a door.

Cap key "on 13" we turn off two bolts of fastening of the top loop to a door.

Similarly we disconnect the lower loop...

... also we remove a door.

Loops are also attached to a body by bolts.

We establish a door in the return sequence.

If external edges of a door act or are drowned rather corresponding edges of a doorway more than on 2 mm or a door is displaced in an aperture up or down, we regulate the provision of a door, having weakened bolts of fastening of loops to a door.

If the door is displaced in the longitudinal direction, then adjustment is possible when weakening bolts of fastening of loops to a body which are available only at the removed forward wing.

If after adjustment the door changed the situation in an aperture, then it is necessary to adjust position of a finger of the lock on the central rack of a body, having weakened it a key "on 17".


"previous page
20:14. Removal of the mechanism of a window regulator
following page"
20:16. Removal of a rear bumper