Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
20.1. Description of a design
20.2. Removal of a front grille
20.3. Removal of the lock of a cowl
20.4. Removal of a cowl
20.5. Removal of a mudguard of the engine
20.6. Removal of a front bumper
20.7. Removal of a forward wing
20.8. Replacement of a windshield
20.9. Removal of an external rear-view mirror
20:10. Replacement of an external part of the lock of a door
20:11. Removal of an upholstery of a door
20:12. Removal of the lock and handles of a door
20:13. Door glass removal
20:14. Removal of the mechanism of a window regulator
20:15. Removal of a door and adjustment of provision of a door in an aperture
20:16. Removal of a rear bumper
20:17. Removal of a gas-filled emphasis of a door of a back
20:18. Removal of the lock of a door of a back
20:19. Removal of a door of a back
20:20. Removal of the back panel of an upholstery of a luggage carrier
20:21. Removal of a casing of a floor
20:22. Removal of the dashboard
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










20-18-snyatie-zamka-dveri-zadka.html

20:18. Removal of the lock of a door of a back

Key "on 10" we turn off two bolts of fastening of the lock to a back door.

We remove the lock.

The case of the drive is condensed with a rubber ring.

For separation of parts of the lock a head and a key "on 10" we turn off nuts of two bolts.

We separate the lock and an arm.

Passatizhami is removed a lock bracket...

... also we remove the drive case from an arm.

We assemble the lock and we install it at a back door in the return sequence. We grease a rubber sealing ring with soap solution.

For removal of a hook of the lock of a door of a back we remove the back panel of an upholstery of a luggage carrier (see. "Removal of the back panel of an upholstery of a luggage carrier").

Cap key "on 12" we turn off two bolts...

... also we remove a back door lock hook.

Change of provision of bolts of fastening in oval grooves of a hook of the lock we regulate density of closing of a door.


"previous page
20:17. Removal of a gas-filled emphasis of a door of a back
following page"
20:19. Removal of a door of a back