Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
20.1. Description of a design
20.2. Removal of a front grille
20.3. Removal of the lock of a cowl
20.4. Removal of a cowl
20.5. Removal of a mudguard of the engine
20.6. Removal of a front bumper
20.7. Removal of a forward wing
20.8. Replacement of a windshield
20.9. Removal of an external rear-view mirror
20:10. Replacement of an external part of the lock of a door
20:11. Removal of an upholstery of a door
20:12. Removal of the lock and handles of a door
20:13. Door glass removal
20:14. Removal of the mechanism of a window regulator
20:15. Removal of a door and adjustment of provision of a door in an aperture
20:16. Removal of a rear bumper
20:17. Removal of a gas-filled emphasis of a door of a back
20:18. Removal of the lock of a door of a back
20:19. Removal of a door of a back
20:20. Removal of the back panel of an upholstery of a luggage carrier
20:21. Removal of a casing of a floor
20:22. Removal of the dashboard
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










20-7-snyatie-perednego-kryla.html

20.7. Removal of a forward wing

We remove the side index of turn (see. "Removal of the side repeater of the index of turns"). We remove a front bumper (see. "Removal of a front bumper").

By the crosswise screw-driver it is turned off four self-tapping screws of fastening of the plastic flap to a wing...

... two self-tapping screws of fastening of the flap to a mudguard in a back part...

... and one in front.

We take out the flap.

The head "on 10" with the extender unscrewed one self-tapping screw through an opening of the side index of turn.

By the same tool it is turned off;

two self-tapping screws of fastening of an arm of a wing to a mudguard in front...

... one self-tapping screw of fastening of a wing around a threshold...

... and six self-tapping screws of the top fastening of a wing.

We remove a wing.

We establish a wing in the return sequence, previously having applied on wing prileganiye surfaces to a body anticorrosive mastic.


"previous page
20.6. Removal of a front bumper
following page"
20.8. Replacement of a windshield