Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
20.1. Description of a design
20.2. Removal of a front grille
20.3. Removal of the lock of a cowl
20.4. Removal of a cowl
20.5. Removal of a mudguard of the engine
20.6. Removal of a front bumper
20.7. Removal of a forward wing
20.8. Replacement of a windshield
20.9. Removal of an external rear-view mirror
20:10. Replacement of an external part of the lock of a door
20:11. Removal of an upholstery of a door
20:12. Removal of the lock and handles of a door
20:13. Door glass removal
20:14. Removal of the mechanism of a window regulator
20:15. Removal of a door and adjustment of provision of a door in an aperture
20:16. Removal of a rear bumper
20:17. Removal of a gas-filled emphasis of a door of a back
20:18. Removal of the lock of a door of a back
20:19. Removal of a door of a back
20:20. Removal of the back panel of an upholstery of a luggage carrier
20:21. Removal of a casing of a floor
20:22. Removal of the dashboard
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










20-9-snyatie-naruzhnogo-zerkala-zadnego-vida.html

20.9. Removal of an external rear-view mirror

The crosswise screw-driver we unscrew the screw of fastening of the handle of adjustment of provision of a mirror...

... also we remove it.

The Shlitsevy screw-driver turned a plastic percussion cap so that its vents settled down vertically.

We take out a percussion cap and we remove internal facing of a mirror.

Head "on 10" we unscrew three self-tapping screws of fastening of a mirror to a door.

We remove a mirror.

We establish a mirror in the return sequence.


"previous page
20.8. Replacement of a windshield
following page"
20:10. Replacement of an external part of the lock of a door