Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
21.1. Description of a design
21.2. Removal of the crane of a heater
21.3. Removal of the airsupercharger and fan of a heater
21.4. Removal of the additional resistor of the fan of a heater
21.5. Removal of a radiator of a heater
21.6. Removal of the case of a heater, control unit of a heater and air ducts of the dashboard
21.7. Removal of an air duct of air supply in a back part of salon
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










21-4-snyatie-dopolnitelnogo-rezistora-ventilyatora-otopitelya.html

21.4. Removal of the additional resistor of the fan of a heater

The additional resistor is located on a motor board more to the right of the cowl lock.

We remove the additional resistor for replacement.

We disconnect a wire of "weight" from the rechargeable battery.

We mark resistor wires...

... also we remove them.

The crosswise screw-driver we unscrew the self-tapping screw of fastening of the additional resistor to a motor board.

We remove the additional resistor.

We install the additional resistor in the return sequence.


"previous page
21.3. Removal of the airsupercharger and fan of a heater
following page"
21.5. Removal of a radiator of a heater