Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
22.1. Features of a design
22.2. Elements of system of production of the fulfilled gases
22.3. Removal of the shock-absorber of a back suspension bracket
22.4. Removal of a spring
22.5. Removal of a back lamp, replacement of lamps
22.6. Removal of plafonds of illumination of registration plate
22.7. Removal of a gas-filled emphasis of a door of a cap
22.8. Removal of the lock of a door of a cap and its drives
22.9. Removal of a door of a cap
22:10. Removal of a cap
22:11. Removal of boards of a body and their locks
23. Appendix
24. Care of a car body
 










22-3-snyatie-amortizatora-zadnejj-podveski.html

22.3. Removal of the shock-absorber of a back suspension bracket

We install the car on a viewing ditch or the elevator.

Rasshplintovyvayem a nut of fastening of the lower eye of the shock-absorber to a plate of step-ladders...

... and a cap key "on 19" we turn off it.

We establish an adjustable emphasis under a plate of step-ladders...

... also we disconnect the lower fastening of the shock-absorber.

Similarly we disconnect the top fastening of the shock-absorber...

... also we remove the shock-absorber.

In an eye of the shock-absorber rubber plugs are installed, and axial movement of an eye is limited by steel washers.

We install the shock-absorber in the return sequence, at the same time nuts are finally tightened in situation "the car on wheels".


"previous page
22.2. Elements of system of production of the fulfilled gases
following page"
22.4. Removal of a spring