Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
4.1. Description of a design
4.2. Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the engine UEPA-331
4.3. Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the VAZ-2106 engine
4.4. Replacement of cooling liquid on the car with the engine UEPA-331
4.5. Replacement of cooling liquid on the car with the VAZ-2106 engine
4.6. Removal and check of the thermostat on the car with the engine UEPA-331
4.7. Removal and check of the thermostat on the car with the VAZ-2106 engine
4.8. Removal of a broad tank
4.9. Replacement of the sensor of temperature of cooling liquid for a combination of devices on the car with the engine UEPA-331
4.10. Replacement of the sensor of temperature of cooling liquid for a combination of devices on the car with the VAZ-2106 engine
4.11. Removal of the sensor of turning on of the electric fan on the car with the engine UEPA-331
4.12. Removal of the sensor of turning on of the electric fan on the car with the VAZ-2106 engine
4.13. Removal of the electric fan of the cooling system
4.14. Removal of a radiator on the car with the engine UEPA-331
4.15. Removal of a radiator on the car with the VAZ-2106 engine
4.16. Removal of the pump of cooling liquid on the car with the engine UEPA-331
4.17. Removal of a cover assembled the pump of cooling liquid on the car with the VAZ-2106 engine
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










4-10-zamena-datchika-temperatury-okhlazhdayushhejj-zhidkosti-dlya-kombinacii-priborov.html

4.10. Replacement of the sensor of temperature of cooling liquid for a combination of devices on the car with the VAZ-2106 engine

We merge cooling liquid from the block of cylinders.

We remove a wire from the sensor.

Cap key "on 21" we turn out the sensor from an opening in a head of the block of cylinders...

... also we remove the sensor.

Check of the sensor is described in the subsection "Check of Control Devices and Their Sensors". At installation of the sensor we grease its carving part with sealant and we wrap the moment of 15-20 N · m (1,5-2 kgfs · м).


"previous page
4.9. Replacement of the sensor of temperature of cooling liquid for a combination of devices on the car with the engine UEPA-331
following page"
4.11. Removal of the sensor of turning on of the electric fan on the car with the engine UEPA-331