Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
4.1. Description of a design
4.2. Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the engine UEPA-331
4.3. Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the VAZ-2106 engine
4.4. Replacement of cooling liquid on the car with the engine UEPA-331
4.5. Replacement of cooling liquid on the car with the VAZ-2106 engine
4.6. Removal and check of the thermostat on the car with the engine UEPA-331
4.7. Removal and check of the thermostat on the car with the VAZ-2106 engine
4.8. Removal of a broad tank
4.9. Replacement of the sensor of temperature of cooling liquid for a combination of devices on the car with the engine UEPA-331
4.10. Replacement of the sensor of temperature of cooling liquid for a combination of devices on the car with the VAZ-2106 engine
4.11. Removal of the sensor of turning on of the electric fan on the car with the engine UEPA-331
4.12. Removal of the sensor of turning on of the electric fan on the car with the VAZ-2106 engine
4.13. Removal of the electric fan of the cooling system
4.14. Removal of a radiator on the car with the engine UEPA-331
4.15. Removal of a radiator on the car with the VAZ-2106 engine
4.16. Removal of the pump of cooling liquid on the car with the engine UEPA-331
4.17. Removal of a cover assembled the pump of cooling liquid on the car with the VAZ-2106 engine
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










4-15-snyatie-radiatora-na-avtomobile-s-dvigatelem-vaz-2106.html

4.15. Removal of a radiator on the car with the VAZ-2106 engine

We perform work on the cold engine.

We merge cooling liquid (see. "Replacement of cooling liquid on the car with the VAZ-2106 engine").

We disconnect a block of a plait of wires of power supply of the electric fan of the cooling system (see. "Removal of the electric fan of the cooling system") and wires from the sensor of turning on of the electric fan (see. "Removal of the sensor of turning on of the electric fan on the car with the VAZ-2106 engine").

The radiator can be dismantled together with the electric fan and its casing, or previously having removed the electric fan and a casing (see. "Removal of the electric fan of the cooling system"). Operations on dismantle of a radiator are shown at the removed electric fan casing.

We weaken a collar of fastening of a steam discharge tube to a radiator branch pipe...

... and it is careful not to break off the plastic union of a radiator, we disconnect from it a tube.

We weaken the screw of a collar of fastening of the top (bringing) radiator hose...

... also we remove a hose from a radiator branch pipe.

We weaken the screw of a collar of fastening of the lower (taking-away) radiator hose...

... and also we remove a hose from a radiator branch pipe.

We take out a radiator.

Will screw the union of the hose connecting a radiator and a broad tank in a carving opening of the left tank of a radiator. If necessary...

... a key "on 17" we unscrew the union...

... also we take out it together with a rubber sealing ring.

Do not lose rubber plugs of the lower fastenings of a radiator...

... which at installation of a radiator enter openings of the arms fixed on the lower cross-piece of a front of a body.

We establish a radiator in the return sequence, trying not to damage its plates about a detail of the engine and a body. We fill system with cooling liquid.


"previous page
4.14. Removal of a radiator on the car with the engine UEPA-331
following page"
4.16. Removal of the pump of cooling liquid on the car with the engine UEPA-331