Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
4.1. Description of a design
4.2. Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the engine UEPA-331
4.3. Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the VAZ-2106 engine
4.4. Replacement of cooling liquid on the car with the engine UEPA-331
4.5. Replacement of cooling liquid on the car with the VAZ-2106 engine
4.6. Removal and check of the thermostat on the car with the engine UEPA-331
4.7. Removal and check of the thermostat on the car with the VAZ-2106 engine
4.8. Removal of a broad tank
4.9. Replacement of the sensor of temperature of cooling liquid for a combination of devices on the car with the engine UEPA-331
4.10. Replacement of the sensor of temperature of cooling liquid for a combination of devices on the car with the VAZ-2106 engine
4.11. Removal of the sensor of turning on of the electric fan on the car with the engine UEPA-331
4.12. Removal of the sensor of turning on of the electric fan on the car with the VAZ-2106 engine
4.13. Removal of the electric fan of the cooling system
4.14. Removal of a radiator on the car with the engine UEPA-331
4.15. Removal of a radiator on the car with the VAZ-2106 engine
4.16. Removal of the pump of cooling liquid on the car with the engine UEPA-331
4.17. Removal of a cover assembled the pump of cooling liquid on the car with the VAZ-2106 engine
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










4-16-snyatie-nasosa-okhlazhdayushhejj-zhidkosti-na-avtomobile-s-dvigatelem-umpo-331.html

4.16. Removal of the pump of cooling liquid on the car with the engine UEPA-331

We perform work on the cold engine.

We merge cooling liquid (see. "Replacement of cooling liquid on the car with the engine UEPA-331").

So far the belt of the drive of the pump of cooling liquid is tense...

... a cap key "on 10" we weaken four bolts of fastening of a pulley of the drive to a flange of a shaft of the pump of cooling liquid.

We take off a belt (see. "Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the engine UEPA-331") and finally we turn off bolts of fastening of a pulley.

We remove a pulley.

We weaken a collar of fastening of the hose connecting a branch pipe of a back cover of the pump of cooling liquid to a broad tank...

... also we disconnect a hose from a branch pipe.

We weaken the collar screw...

... also we disconnect a thermostat hose from a branch pipe of a back cover of the pump of cooling liquid.

We weaken a collar.

... also we disconnect a hose of heating of an inlet collector of the engine from a branch pipe of a back cover of the pump of cooling liquid.

We weaken a collar of fastening of the taking-away heater hose to a branch pipe of a back cover of the pump of cooling liquid...

... also we disconnect the taking-away heater hose.

Head "on 13" we turn off a nut of a bolt of fastening of an adjusting level of the generator to a pump housing of cooling liquid, holding a bolt from a provorachivaniye a key "on 12".

This bolt serves also as fastening of the case and a back cover of the pump of cooling liquid to inflow on the block of cylinders of the engine.

We take out a bolt and we take away an adjusting level.

Similarly we turn off three more nuts of bolts of fastening of the case and a back cover of the pump of cooling liquid to inflow of the block of cylinders of the engine...

... also we remove the pump.

Connection is condensed with laying.

We take out bolts...

... we remove a back cover of the pump of cooling liquid...

... and its laying.

We establish knots and details in the return sequence. We replace laying new, having applied on everyone a thin film of sealant.


"previous page
4.15. Removal of a radiator on the car with the VAZ-2106 engine
following page"
4.17. Removal of a cover assembled the pump of cooling liquid on the car with the VAZ-2106 engine