Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
4.1. Description of a design
4.2. Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the engine UEPA-331
4.3. Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the VAZ-2106 engine
4.4. Replacement of cooling liquid on the car with the engine UEPA-331
4.5. Replacement of cooling liquid on the car with the VAZ-2106 engine
4.6. Removal and check of the thermostat on the car with the engine UEPA-331
4.7. Removal and check of the thermostat on the car with the VAZ-2106 engine
4.8. Removal of a broad tank
4.9. Replacement of the sensor of temperature of cooling liquid for a combination of devices on the car with the engine UEPA-331
4.10. Replacement of the sensor of temperature of cooling liquid for a combination of devices on the car with the VAZ-2106 engine
4.11. Removal of the sensor of turning on of the electric fan on the car with the engine UEPA-331
4.12. Removal of the sensor of turning on of the electric fan on the car with the VAZ-2106 engine
4.13. Removal of the electric fan of the cooling system
4.14. Removal of a radiator on the car with the engine UEPA-331
4.15. Removal of a radiator on the car with the VAZ-2106 engine
4.16. Removal of the pump of cooling liquid on the car with the engine UEPA-331
4.17. Removal of a cover assembled the pump of cooling liquid on the car with the VAZ-2106 engine
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










4-17-snyatie-kryshki-v-sbore-nasosa-okhlazhdayushhejj-zhidkosti-na.html

4.17. Removal of a cover assembled the pump of cooling liquid on the car with the VAZ-2106 engine

We perform work on the cold engine.

We merge cooling liquid (see. "Replacement of cooling liquid on the car with the VAZ-2106 engine").

So far the belt of the drive of the pump of cooling liquid is tense...

... a cap key "on 13" we weaken three bolts of fastening of a pulley of the drive to a flange of a shaft of the pump of cooling liquid.

We take off a belt (see. "Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the VAZ-2106 engine") and finally we turn off bolts of fastening of a pulley.

We remove a pulley.

Cap key "on 17" we turn off a nut of fastening of an adjusting level of the generator to a cover of the pump of cooling liquid.

We take away the generator from the engine, removing a tension level from a pump cover hairpin.

Cap key "on 13" we turn off four nuts of fastening of a cover of the pump of cooling liquid to the case.

We uncover assembled with the roller and a krylchatka.

Connection of a cover of the pump with the case is condensed with laying.

We establish a pump cover assembled in the return sequence.

Removal of a pump housing of cooling liquid is shown in the subsection "Dismantling and Assembly of the Engine".


"previous page
4.16. Removal of the pump of cooling liquid on the car with the engine UEPA-331
following page"
5. Power supply system