Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
5.1. Description of a design
5.2. Replacement of the fuel filter of thin cleaning
5.3. Replacement of a replaceable element of the air filter
5.4. Removal of the case of the air filter
5.5. Removal of the fuel pump on the car with the engine UEPA-331
5.6. Removal of the fuel pump on the car with the VAZ-2106 engine
5.7. Dismantling of the fuel pump
5.8. Removal of the fuel tank and fuel receiver
5.9. Removal of a cable of the drive of butterfly valves of the carburetor
5.10. Removal of a cable of the drive of the air gate of the carburetor
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










5-2-zamena-toplivnogo-filtra-tonkojj-ochistki.html

5.2. Replacement of the fuel filter of thin cleaning

On the car with the engine UEPA-Z31.

... we weaken collars on fuel hoses...

... also we remove the fuel filter.

The new filter is installed so that the arrow on the case indicated the carburetor.

For installation of the filter of thin cleaning on the car with the VAZ-2106 engine it is necessary to cut a fuel hose on the site from the fuel pump to the carburetor (closer to the carburetor) and to install the filter so that the arrow on the filter was directed to the carburetor.


"previous page
5.1. Description of a design
following page"
5.3. Replacement of a replaceable element of the air filter