Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
5.1. Description of a design
5.2. Replacement of the fuel filter of thin cleaning
5.3. Replacement of a replaceable element of the air filter
5.4. Removal of the case of the air filter
5.5. Removal of the fuel pump on the car with the engine UEPA-331
5.6. Removal of the fuel pump on the car with the VAZ-2106 engine
5.7. Dismantling of the fuel pump
5.8. Removal of the fuel tank and fuel receiver
5.9. Removal of a cable of the drive of butterfly valves of the carburetor
5.10. Removal of a cable of the drive of the air gate of the carburetor
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










5-8-snyatie-toplivnogo-baka-i-toplivopriemnika.html

5.8. Removal of the fuel tank and fuel receiver

Before removal of a tank from it it is necessary to pump out or run out of fuel.

We install the car on a viewing ditch or the elevator.

We remove a protective cap from fuel receiver wires.

Having marked, we remove wires.

Passatizhami we weaken a fuel pipe hose collar.

We remove a hose from the fuel receiver union.

Having weakened a collar...

... we pick up the airbringing phone from the tank union.

Key "on 10" we turn off a nut of fastening of a collar of a bulk pipe.

We remove a collar.

The Shlitsevy screw-driver we weaken a collar of fastening of the rubber coupling to a bulk pipe.

We separate a bulk pipe and the coupling.

We establish an adjustable emphasis under a tank.

Two keys "on 17" raskontrivay nuts of back fastening of the fuel tank.

Head "on 12" we turn off two bolts of forward fastening of a tank.

Having turned off a nut of back fastening...

... we remove the fuel tank.

Having weakened a collar, we remove the coupling from a tank branch pipe.

By the Shlitsevy screw-driver it is turned off five screws of fastening of a fuel receiver.

We take out a fuel receiver with the index of level of fuel.

Connection of a fuel receiver and tank is condensed with rubber laying.

Assembly is carried out е the return sequence, at the same time...

... the ledge on rubber laying has to be directed to the fuel receiver union.


"previous page
5.7. Dismantling of the fuel pump
following page"
5.9. Removal of a cable of the drive of butterfly valves of the carburetor