Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
7.1. Description of a design
7.2. Replacement of spark plugs
7.3. Removal of a cover and rotor of the distributor of ignition
7.4. Ignition distributor lubricant
7.5. Adjustment of the moment of ignition
7.6. Check and adjustment of a gap between contacts of the breaker
7.7. Removal of the distributor of ignition
7.8. Dismantling of the distributor of ignition
7.9. Removal of the condenser
7.10. Removal of the vacuum regulator of an advancing of ignition
7.11. Removal of a motionless plate of contact group of the breaker
7.12. Removal of the roller of the distributor
7.13. Removal of the coil of ignition
7.14. Councils of skilled
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










7-14-sovety-byvalykh.html

7.14. Councils of skilled

"Faulty" contact group


Correct (top drawing) and wrong
provision of a wire (lower)

The wire of contact group of the breaker is attached to a plate of motionless contact differently Ч sometimes so that at installation of contacts it is by all means bent and the bend concerns rotating "runner". It is fraught with break conducting, an engine stop, and even short circuit of system of ignition on "weight". The right direction of a wire Ч towards an axis of mobile contact, as shown in the drawing. If you happened to buy the "wrong" contact group, just to a perepayayta a wire to insure itself from troubles.


"previous page
7.13. Removal of the coil of ignition
following page"
8. System of ignition of the VAZ-2106 engine