Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
7.1. Description of a design
7.2. Replacement of spark plugs
7.3. Removal of a cover and rotor of the distributor of ignition
7.4. Ignition distributor lubricant
7.5. Adjustment of the moment of ignition
7.6. Check and adjustment of a gap between contacts of the breaker
7.7. Removal of the distributor of ignition
7.8. Dismantling of the distributor of ignition
7.9. Removal of the condenser
7.10. Removal of the vacuum regulator of an advancing of ignition
7.11. Removal of a motionless plate of contact group of the breaker
7.12. Removal of the roller of the distributor
7.13. Removal of the coil of ignition
7.14. Councils of skilled
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










7-4-smazka-raspredelitelya-zazhiganiya.html

7.4. Ignition distributor lubricant

Each 15 thousand kilometers of a run of the car should be greased distributor knots. For this purpose we uncover the distributor (see. "Removal of a cover and rotor of the distributor of ignition"). In photos the distributor is removed for descriptive reasons.

For lubricant of the bearing of sliding in which the distributor roller rotates...

... we shift a spring cover from the butterdish located near fastening of the condenser to the distributor case...

... and by the syringe it is entered several drops of engine oil into a butterdish opening.

For lubricant of a working surface of a cam...

... with the syringe it is applied several drops of oil on a felt filts of a cam.

We grease with one-two drops of engine oil an axis of mobile contact.

For couple lubricant "the roller — an internal surface of a cam of the distributor" we remove a distributor rotor (see. "Removal of a cover and rotor of the distributor of ignition")...

... and with the syringe it is applied several drops of engine oil on the felt epiploon located in a cam end face.

We establish the removed details in the return sequence.


"previous page
7.3. Removal of a cover and rotor of the distributor of ignition
following page"
7.5. Adjustment of the moment of ignition