8.3. Removal of a cover of the distributor of ignition
Carefully, not to damage tips of wires, we take out high-voltage wires from cover nests.
We release two spring latches of fastening of a cover...
... also we uncover.
For replacement of a piece of coal (the sprung contact) of the central electrode we turn a piece of coal counterclockwise...
... also we take out it together with a spring from a cover nest.
We separate a spring and a piece of coal.
We establish an ignition distributor cover in the return sequence. At the same time...
... the groove of a cover is combined...
... with the plastic clamp installed in the distributor case.
We insert high-voltage wires into cover nests according to the numbering of cylinders put on a cover.