Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
8.1. Description of a design
8.2. Replacement of spark plugs
8.3. Removal of a cover of the distributor of ignition
8.4. Removal of a rotor of the distributor of ignition
8.5. Ignition distributor lubricant
8.6. Adjustment of the moment of ignition
8.7. Check and adjustment of a gap between contacts of the breaker
8.8. Removal of the distributor of ignition
8.9. Dismantling of the distributor of ignition
8.10. Removal of the coil of ignition
8.11. Councils of skilled
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










8-4-snyatie-rotora-raspredelitelya-zazhiganiya.html

8.4. Removal of a rotor of the distributor of ignition

The rotor is removed for its replacement or for access to the mechanism of the centrifugal regulator.

Having released latches, we uncover the distributor, without taking out high-voltage wires from its nests.

By the Shlitsevy screw-driver it is turned off two screws of fastening of a rotor to a basic plate of the centrifugal regulator...

... also we remove a rotor.

We establish a rotor in the return sequence. At the same time...

... the square ledge of a rotor has to enter a groove, and a cylindrical ledge - an opening of a basic plate (it is for descriptive reasons shown on the removed distributor).


"previous page
8.3. Removal of a cover of the distributor of ignition
following page"
8.5. Ignition distributor lubricant