Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
8.1. Description of a design
8.2. Replacement of spark plugs
8.3. Removal of a cover of the distributor of ignition
8.4. Removal of a rotor of the distributor of ignition
8.5. Ignition distributor lubricant
8.6. Adjustment of the moment of ignition
8.7. Check and adjustment of a gap between contacts of the breaker
8.8. Removal of the distributor of ignition
8.9. Dismantling of the distributor of ignition
8.10. Removal of the coil of ignition
8.11. Councils of skilled
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










8-5-smazka-raspredelitelya-zazhiganiya.html

8.5. Ignition distributor lubricant

Each 15 thousand kilometers of a run of the car should be greased distributor knots. Work can be carried out, without removing the distributor from the engine, but for descriptive reasons operations are shown on the removed distributor. We uncover the distributor (see. "Removal of a rotor of the distributor of ignition").

We turn a spring cover of the butterdish located near the case of the vacuum regulator of an advancing of ignition.

By the syringe it is entered into a butterdish opening 3-4 drops of pure engine oil.

We grease with one-two drops of engine oil an axis of mobile contact...

... and felt фильц cam.

We close an opening of a butterdish and we establish a distributor cover.


"previous page
8.4. Removal of a rotor of the distributor of ignition
following page"
8.6. Adjustment of the moment of ignition