Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
8.1. Description of a design
8.2. Replacement of spark plugs
8.3. Removal of a cover of the distributor of ignition
8.4. Removal of a rotor of the distributor of ignition
8.5. Ignition distributor lubricant
8.6. Adjustment of the moment of ignition
8.7. Check and adjustment of a gap between contacts of the breaker
8.8. Removal of the distributor of ignition
8.9. Dismantling of the distributor of ignition
8.10. Removal of the coil of ignition
8.11. Councils of skilled
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 










8-8-snyatie-raspredelitelya-zazhiganiya.html

8.8. Removal of the distributor of ignition

We uncover the distributor (see. "Removal of a cover of the distributor of ignition").

We remove a hose from the union of the case of the vacuum regulator of an advancing of ignition.

We apply tags on a flange of the case of the distributor and the block of cylinders.

We mark the place to which the tokoraznosny plate of a rotor is directed on a cover of a head of the block of cylinders.

Cap key "on 13" we turn off a nut of fastening of a wire of "weight" and a clamping level of the case of the distributor.

We remove a tip of a wire of "weight" from a hairpin of the block of cylinders.

We remove a clamping level.

We take out the distributor from a nest of the block of cylinders.

Key "on 7" we turn off a nut of fastening of a wire from the distributor to the ignition coil...

... also we remove a tip.

We remove sealing laying of the case of the distributor.

We install the distributor in the return sequence, being guided on tags (see a photo 2-3).


"previous page
8.7. Check and adjustment of a gap between contacts of the breaker
following page"
8.9. Dismantling of the distributor of ignition